PCB Panel Requirement of Assembly

Table of Contents
PCB PANELIZATION · ASSEMBLY DATA CHECKLIST
PCB panel requirements to confirm before assembly
A panel holds one or more boards together for manufacturing and assembly. A suitable panel can help handling, alignment and production flow, but its layout must also allow component placement, test access and separation of the finished boards.
Share the proposed panel with the assembly team before releasing fabrication. Dimensions, rail widths, holes, clearances and separation details need to fit the board construction and selected process.
Request a panel and assembly reviewCheck the drawing requirements
What to show on the panel drawing
Board and panel geometry
Show the finished unit-board outline and overall panel outline, thickness, quantity per panel, board orientation, cut-outs and required dimensional tolerances. State the units and design revision clearly.
Rails and handling support
Identify the proposed handling edges and areas available for clamping or support. Mark heavy or tall parts and any existing fixture constraints so the handling arrangement can be reviewed.
Fiducials and tooling holes
Identify the positions and dimensions of alignment targets and tooling holes. Confirm the required arrangement for paste printing, placement and fixtures instead of assuming one hole pattern suits every line.
Edge clearances and overhang
Show copper, components, connectors and other features close to the finished edge or extending beyond it. Include the assembled height and access needed for handling, cutting and testing.
Separation details
Mark proposed V-score lines or routed outlines and tabs. For perforated tabs, distinguish drill diameter, hole center spacing and the remaining material between holes. Agree the finished edge and tab-remnant requirements.
Variants and identification
If the panel contains different designs or assembly variants, identify each position, BOM revision, DNP arrangement and required finished quantity. State how the boards should be identified and packed.
Submit the proposed values and any critical constraints with your drawing. The accepted dimensions and tolerances belong in the approved project documentation.
Discuss the separation method with the assembler
V-scoring
V-scoring places grooves along the intended separation lines. Show the complete scoring layout and discuss board thickness, remaining web, component clearance and the equipment or support used for separation.
Routed outlines and tabs
Routing can define board contours while tabs hold the boards in the panel. Tab location, routing access, support and the final edge need to be considered together. Perforation geometry should be dimensioned clearly.
Include sensitive components and mechanical constraints in the review. Panelization and depaneling can introduce handling and mechanical risks, so suitability should be assessed for the assembled design.
Files to include with your assembly RFQ
- Unit-board fabrication files, drill data and a dimensioned mechanical outline.
- Proposed panel drawing, boards per panel and the intended separation method.
- Editable BOM, placement data, DNP positions and assembly drawings for each variant.
- Component overhang, height, sensitive areas and any fixture or test-access constraints.
- Required finished quantity, supply arrangement, delivery country and requested date.
If you only have unit-board files, start with those and describe the intended assembly order. The remaining panel questions can be clarified before fabrication is approved.
Connect the panel review to the right assembly service
- For an initial design build, use prototype PCB assembly and identify what the samples need to validate.
- For repeated small batches or variants, use low-volume, high-mix PCB assembly and identify quantities and changes by revision.
- For boards, component sourcing and assembly in one quotation, use full turnkey PCB assembly.
See the PCB assembly process guide for how panel preparation fits into a build, or explore the overall PCB assembly service scope.
Panelization questions before ordering
Can a previously used panel be reused?
Identify the earlier order and confirm whether the board, component overhang, BOM, test setup or separation requirements have changed. Submit the panel revision with the new request.
What if I already have panelized Gerbers?
Include the matching panel drawing and unit-board information. Confirm the panel and assembly arrangement before committing the fabrication order.
Does one panel design work for every board?
The board construction, component layout, assembly equipment and separation method affect the accepted design. Send the actual requirements for review rather than applying dimensions from another project.
Turn your design package into an assembly RFQ
Send the information you have: board and panel files, an editable BOM with exact part numbers, placement data, quantity, delivery country and required inspection or tests. Identify missing files or open questions so they can be clarified before a production quote is confirmed.
Request my PCB assembly quoteDownload the RFQ & BOM worksheet
The blank Excel worksheet is optional (XLSX, 8 KB). Your existing BOM format is welcome. Include a separate dimensioned panel drawing if panelization is part of your request.
For NDA requirements or a question before sharing files, contact our team.
Contact us
WhatsApp: +86-13570802455
Wechat: +86-13570802455
Email: [email protected]


