Aluminum PCB

By |Categories: PCB|Published On: April 27th, 2025|
aluminum pcb

Table of Contents

Y&T TECHNOLOGY · MANUFACTURING SERVICES

Aluminum PCB thermal requirements

Use the technical information below to prepare a project-specific quotation.

  • Specify dielectric, thermal requirements, copper, thickness, finish and the component mounting arrangement.
  • Include quantity, approved drawing revision, inspection requirements and target delivery date.

Request a project quote Contact our team

Define the metal-core PCB construction

Send with your request

  • Provide fabrication data, outline, quantity and assembly scope.
  • Specify metal base, dielectric grade, copper thickness and isolation requirements.
  • Identify thermal interfaces, mounting holes, cut-outs and surface finish.

Agree before the order starts

  • Review thermal and insulation requirements against the selected dielectric material.
  • Agree finished dimensions, test voltage if required, and inspection documentation before production.

Include quantity, delivery destination and requested date. Your quotation identifies the accepted scope, exceptions, documentation and schedule.

Request an engineering and purchasing review

Aluminum PCB Advanced Circuits Specification

Among all Metal core PCBs (aka MCPCBs, known for their ability to provide effective thermal dissipation for electronic products), Aluminum PCBs is the most common type – the base material consists of aluminum core with standard FR4. It features a thermal clad layer that dissipates heat in a highly efficient manner, while cooling components and increasing the overall performance of the products. Currently, Aluminum Backed PCBs is regarded as the solution to high power and tight tolerance applications.

Y&T Technology: An Experienced MCPCB Manufacturer

Y&T Technology been manufacturing aluminum PCBs for 10+ years. Our full feature aluminum circuit boards making capabilities and Free DFM Check allow you to get high-quality aluminum PCBs done within budget. Our printed Aluminum PCBs are widely used for LED lighting, power equipment and automotive systems.

The following table presents some of our Aluminum Core materials:

Items Information for engineering review
Peeling strength (n/mm) Specify peeling strength (n/mm) requirements, units and tolerances in the RFQ; engineering confirms the accepted project specification.
Insulation resistance (ω) Specify insulation resistance (ω) requirements, units and tolerances in the RFQ; engineering confirms the accepted project specification.
Breakdown voltage (vdc) Specify breakdown voltage (vdc) requirements, units and tolerances in the RFQ; engineering confirms the accepted project specification.
Soakable soldering (°C/m) Specify soakable soldering (°c/m) requirements, units and tolerances in the RFQ; engineering confirms the accepted project specification.
Thermal conductivity (ω/m-k) Specify thermal conductivity (ω/m-k) requirements, units and tolerances in the RFQ; engineering confirms the accepted project specification.
Thermal resistance (°C/ω) Specify thermal resistance (°c/ω) requirements, units and tolerances in the RFQ; engineering confirms the accepted project specification.
Combustibility Specify combustibility requirements, units and tolerances in the RFQ; engineering confirms the accepted project specification.
Dielectric constant (1mhz) Specify dielectric constant (1mhz) requirements, units and tolerances in the RFQ; engineering confirms the accepted project specification.
Dielectric loss angle (tangent) Specify dielectric loss angle (tangent) requirements, units and tolerances in the RFQ; engineering confirms the accepted project specification.

Check our Aluminum core PCB manufacturing capabilities in the following table:

Feature Information for engineering review
Quality Grade Required IPC standard, revision, acceptance class and inspection scope agreed in the quotation.
Number of Layers Provide the layer count and complete stack-up; engineering confirms the accepted construction.
Order Quantity Provide initial and repeat-order quantities. Accepted batch size, panel utilization and charges are confirmed per project.
Build Time Fabrication lead time and any accepted rush option are confirmed after material, construction, quantity and production review. This is separate from assembly and international transit.
Material Specify the manufacturer, grade, datasheet revision and required material declarations; availability and substitutions require confirmation.
Board Size Supply finished outline and panel drawing with units and dimensional tolerances; accepted dimensions are confirmed by engineering.
Board Thickness Specify the finished thickness, stack-up and tolerance. Engineering confirms the achievable combination for your construction.
Copper Weight (Finished) Specify starting and finished copper, units, layer location and tolerance. Feasibility is confirmed with the stack-up.
Min Tracing/Spacing Provide trace and spacing requirements with units, copper weight and layer location; engineering confirms the design limits.
Solder Mask Sides Specify mask sides, colour, openings, registration and any special acceptance requirements for review.
Solder Mask Color Specify mask sides, colour, openings, registration and any special acceptance requirements for review.
Silkscreen Sides Specify legend sides, colour, minimum text and registration requirements in the fabrication data.
Silkscreen Color Specify legend sides, colour, minimum text and registration requirements in the fabrication data.
Surface Finish Specify the finish or plating system, applicable standard, thickness and documentation required for the project.
Min Annular Ring Identify drilled versus finished PTH or NPTH dimensions, units, tolerances and applicable stack-up for engineering review.
Min Drilling Hole Diameter Identify drilled versus finished PTH or NPTH dimensions, units, tolerances and applicable stack-up for engineering review.
Other Techniques Identify the required special process, via construction, edge treatment or inspection. Engineering confirms availability and any tooling or cost impact.

Get Free Quotation of your Aluminum PCB Project

Upload your PCB design file to get Aluminum PCB fabrication price. We will NEVER share your project design with third party. Your design is safe with us.

Request Aluminum PCB Fabrication Quote

Should you have any question about Alumimum PCB design, manufacturing capabilities or your custom PCB project requires technique which are not listed in the above table, get in touch with us right now. One of our skillful engineers will respond very quickly.

Share This Post, Choose Your Platform!

Contact us

Free Quote

File formats & upload help

For PCBA, send Gerber files in a ZIP, an XLSX/CSV BOM, placement data and PDF assembly or test instructions. Keep all files on the same board revision.

Each file must be smaller than 100 MB. If a file is rejected or the upload fails, submit your enquiry without it and tell us what is missing. For a larger package, contact [email protected] to agree a transfer method. Include your RFQ reference if you already have one.

Download the RFQ / BOM template

Click or drag a file to this area to upload.