High -Tg PCB

By |Categories: PCB|Published On: April 27th, 2025|
PCB21

Table of Contents

Y&T TECHNOLOGY · MANUFACTURING SERVICES

High-Tg PCB material selection

Use the technical information below to prepare a project-specific quotation.

  • Specify laminate grade, Tg requirements, thickness, stack-up and the relevant operating / assembly conditions.
  • Include quantity, approved drawing revision, inspection requirements and target delivery date.

Request a project quote Contact our team

Select the laminate for the operating conditions

Send with your request

  • Identify the required laminate grade and material documentation.
  • Describe operating temperature, assembly thermal cycles and intended application.
  • Provide stack-up, copper, finish and any moisture or reliability requirements.

Agree before the order starts

  • Do not select a laminate by Tg alone; review the complete material data.
  • Approve material substitution and the agreed qualification evidence before manufacture.

Include quantity, delivery destination and requested date. Your quotation identifies the accepted scope, exceptions, documentation and schedule.

Request an engineering and purchasing review

When it comes to FR-4 high-TG PCBs, Y&T Technology has the experience and quality products you need for your industry. If you work with printed circuit boards that you will be subjecting to high temperatures, you need to be sure those PCBs can take the heat.

At Y&T Technology, our high-temperature PCB products can handle extreme PCB glass transition-temperature rates and retain their integrity, so you can use these high-TG FR-4 boards with confidence. We have a 99% plus customer satisfaction rate and are well known for our reliable, fast service as shown by our customer testimonials.

If you’re not sure whether your particular operation requires FR-5 high-TG boards or how exactly a TG PCB works to protect your sensitive circuits during implementation, we’re happy to tell you everything you need to know. Read on to gain a full understanding of just how a high-temperature PCB works and what it can do for you. Once you’re satisfied that FR-4 high-TG boards are right for you, follow the steps at the bottom of this page to get free quote on high TG FR-4 boards from Y&T Technology today.

High-TG PCB Advanced Circuits Specification

The glass transition temperature of PCB, referred to as “Tg”, indicates the point at which the PCB material will begin to transform. If the operating temperature exceeds the designated Tg value, the board will begin to change from a solid to a liquid state, which is likely to have an adverse effect on its ability to function.

Standard PCBs are manufactured with materials offering a TG value of 140°C, which can withstand an operating temperate of 110°C. While this may not be suitable for extreme-temperature processes that are commonplace in applications such as automotive, industrial or high-temperature electronics. In these situations, a PCB made from FR-4 material can often provide the best solution.

What Is FR-4?

FR-4 is a grade designation for flame-retardant fiberglass reinforced epoxy material. Thus, FR-4 PCB offers a much greater level of resistance to heat than a standard PCB. FR-4 circuit boards are divided into four classifications that are determined by the number of copper trace layers found in the material:

  • • Single-sided PCB / Single-layer PCB
  • • Double-sided PCB / Double-layer PCB
  • • Four or more than 10 layers PCB / Multilayer PCB

Providing the Right High-Temperature PCB for Your Applications

Y&T Technology offers a wide selection of high-temperature PCB products manufacturing services either with FR-4 or other high-quality heat- and temperature-resistant Tg materials. We are able to perform high-temperature PCB fabrication for automotive, industry and high-temperature electronics applications. Specify the required Tg and laminate grade; engineering confirms the construction and material availability. Following table lists some of our commonly used materials for High-Tg PCBs production.

Material TG
(DSC, °C)
Td
(Wt, °C)
CTE-z
(ppm/°C)
Td260
(min)
Td288
(min)
S1141 (FR4) 175 300 55 8 /
S1000-2M (FR4) 180 345 45 60 20
IT180 180 345 45 60 20
Rogers 4350B 280 390 50 / /

Regardless of the scope or complexity of your PCB application, we have the technical expertise to develop customized PC boards that meets your specific demands. Check our capabilities in here:

Feature Information for engineering review
Quality Grade Required IPC standard, revision, acceptance class and inspection scope agreed in the quotation.
Number of Layers Provide the layer count and complete stack-up; engineering confirms the accepted construction.
Order Quantity Provide initial and repeat-order quantities. Accepted batch size, panel utilization and charges are confirmed per project.
Build Time Fabrication lead time and any accepted rush option are confirmed after material, construction, quantity and production review. This is separate from assembly and international transit.
Material Specify the manufacturer, grade, datasheet revision and required material declarations; availability and substitutions require confirmation.
Board Size Supply finished outline and panel drawing with units and dimensional tolerances; accepted dimensions are confirmed by engineering.
Board Thickness Specify the finished thickness, stack-up and tolerance. Engineering confirms the achievable combination for your construction.
Copper Weight (Finished) Specify starting and finished copper, units, layer location and tolerance. Feasibility is confirmed with the stack-up.
Min Tracing/Spacing Provide trace and spacing requirements with units, copper weight and layer location; engineering confirms the design limits.
Solder Mask Sides Specify mask sides, colour, openings, registration and any special acceptance requirements for review.
Solder Mask Color Specify mask sides, colour, openings, registration and any special acceptance requirements for review.
Silkscreen Sides Specify legend sides, colour, minimum text and registration requirements in the fabrication data.
Silkscreen Color Specify legend sides, colour, minimum text and registration requirements in the fabrication data.
Surface Finish Specify the finish or plating system, applicable standard, thickness and documentation required for the project.
Min Annular Ring Identify drilled versus finished PTH or NPTH dimensions, units, tolerances and applicable stack-up for engineering review.
Min Drilling Hole Diameter Identify drilled versus finished PTH or NPTH dimensions, units, tolerances and applicable stack-up for engineering review.
Other Techniques Identify the required special process, via construction, edge treatment or inspection. Engineering confirms availability and any tooling or cost impact.

Get Production Price of Your High-Tg PCBs

Please click below button to enter our PCB Quote page, then fill in your circuit spec and submit;We will reply you as soon as possible by Email.

Quote for High-Tg PCB Fabrication

Share This Post, Choose Your Platform!

Contact us

Free Quote

File formats & upload help

For PCBA, send Gerber files in a ZIP, an XLSX/CSV BOM, placement data and PDF assembly or test instructions. Keep all files on the same board revision.

Each file must be smaller than 100 MB. If a file is rejected or the upload fails, submit your enquiry without it and tell us what is missing. For a larger package, contact [email protected] to agree a transfer method. Include your RFQ reference if you already have one.

Download the RFQ / BOM template

Click or drag a file to this area to upload.