The electronic assembly industry uses SMT as the most common processing technology. This processing technology can reduce costs and increase production efficiency. This processing technology is used in the processing facility of yt-electronic. SMT is divided into two types of patch processing:single-sided and dual-sided. It can also be broken down into mixed assembly and assembly. Today I'll show you how.

Single-Sided Assembly:

Inspection of incoming material - Screen printing solder glue (apply SMD adhesive) – SMD – Drying (curing), reflow soldering, cleaning and inspection

Double-Sided Assembly:

A: Inspection of incoming material - Screen Printing Solder Paste (Apply SMD Glue) on the PCB A Side – Screen Printing Solder paste (Apply SMD Glue) on the PCB B Side – SMD – Drying – Reflow soldering.

B: Inspection of incoming material – Screen printing solder paste on PCB A-side – SMD – Drying (curing), Reflow soldering A-side – Cleaning, Flip board – Applying SMD glue to PCB B-side SMD Curing Wave soldering B-side ­ Cleaning, Inspection and Rework.

This technology can be used for wave soldering and reflow on the A side of the PCB. This processing technology can be used for SMDs that are assembled on the PCB's B side with only SOT or SoIC (28 pins) or less.

Mixed Assembly with Single-Sided:

Incoming material inspection (screen printing solder paste) – SMD (drying/curing) – Reflow soldering (cleaning) – Insertion (wave soldering) – Cleaning & Inspection Rework

Double-sided mixed assembly

A: Inspection of incoming material – Applying SMD glue to PCB B Side – SMD – Curing – Flip board ­ Insertion onto PCB A Side ­ Wave soldering on PCB A Side ­ Cleaning — Inspection — Rework

If there are more discrete components than SMD components, it is best to apply first and insert afterwards

B: Inspection of incoming material – PCB A surface plug-in (pin-bending) – flip board PCB B Surface SMD glue SMD – curing – flip board Wave soldering cleaning inspection rework

If there are more discrete parts than SMD, it is best to plug in first before sticking.

C: Inspection of incoming material – PCB A surface solder paste screen printing – SMD – drying – reflow soldering, pin bending, flip board, PCB B Surface SMD glue, SMD, curing, flip board, wave soldering, cleaning, inspection, rework, A surface mixed.

D: Inspection of incoming material – PCB A Surface screen printing solder paste, SMD – A surface reflow-soldering – plugin – B surface wave-soldering ­ cleaning ­ inspection ­ rework A and B surface mounting. Initially, paste the SMD on both surfaces, then reflow soldering. Then insert and wave sell.

E: Incoming Material Inspection => PCB A side mounting and B side mixed assembly.

You can see the above picture of Shenzhen SMT's single-sided and dual-sided patch processing. Yt-electronic is available for consultation at any time. Yt-electronic is a Shenzhen-based SMT manufacturer with 6 years' experience. We offer high quality products and quick delivery.

Shenzhen PCB assembly is a well-established electronic processing facility in Shenzhen that can offer SMT processing. The company has a wealth of experience in PCBA assembly. PCBA can be your one-stop shop. Yt-electronic also offers DIP plug-in production, PCB manufacturing, and electronic circuit boards.