A printed circuit board is used in electronic products like mobile phones, TVS and even cars. How do you put together so many parts to make a circuit board? This article will explain the whole process of PCBA (printed circuit board assembly).

PCBA Process Flow

The Printed Circuit Board Assembly Process refers to specific operating steps and requirements for PCB Assembly. It includes PCB design, fabrication, material procurement and SMT patching, as well as testing and three-proof painting.

Step 1: PCB Design and Fabrication

PCB design depends on PCB engineers, including PCB schematics and circuit diagrams. After checking, you can arrange for a PCB manufacturer to produce prototypes and mass production.

Step 2: Design a BOM Table and Purchase Materials

BOM is a detailed material selection and design document that engineers use. It is a detailed document that defines the product's structure, based on the PCB drawings of the product and its functions.

Step 3: Apply the SMT Patch

SMT patches are an important part of PCB assembly, which welds components to PCB substrates. Wave crest soldering is one of the welding methods. Re-flow soldering and manual welding are also available. Manual welding with rework is available, as well as wave soldering and reflow welding. After welding, the PCBs must be cleaned sweep after welding. They will then be dried before being sent to be tested for quality.

1) Solder Paste Is Applied:

Apply the solder paste evenly and correctly to the solder pads on the surface.

Solder paste is composed of tiny metal balls that are composed of 96.5% of tin, 3.5% of silver and 0.5% of copper. Solder paste is made up of flux and solder. Flux is the chemical that makes the solder stick and melt.

2) SPI Detection:

It is important to inspect the solder paste after it has been printed using a SPI machine. Checking is done to verify the quality of the printed solder paste, as well as if there are any tin-leakage or tin-less problems.

3) Patch:

The robot will then place the surface-mount components on the PCB after applying the solder paste.

4) Re-Flow Welding:

Due to the fact that the soldering paste has no solidifying effects, the component will not be very solid after mounting. Re-flow welding must then be performed to make the component solid. It is commonly referred to as melting and cooling at high temperatures. The components are firmly on the board.

Step 4: Insert the Through-Hole Element

The welding method chosen depends on the type and size of the circuit board. There are also PHT or electroplated through-hole parts. Electroplated through-hole components are holes in the circuit board. These holes transmit the signal from one side to the other of the board. Solder paste printing through the holes has no attachment point. This requires a specific soldering technique.

1) Manual Welding:

Manual perforation welding is a good option.

2) Crest Welding:

Then, the conveyor belt is used to send the board directly to the wave soldering machine, which melts the paste and forms the solder joints. It is then sent via conveyor belt to the wave-soldering machine to melt the paste and form the solder joints. The components are securely attached to the board.

Step 5: PCB Cleaning

The printed circuit board must be cleaned after assembly to remove any welding traces and contaminants. The circuit board is cleaned with deionized or improvement solution, then deionized and high-pressure water is used. Use a powerjet to dry the board after cleaning and send it off for final product testing.

Step 6: PCBA Test

The printed circuit board assembly test ensures the product is working correctly. Some automated tests detect the PCB and further enhance PCB efficiency and quality. This test includes burn-in, functional, and reliability tests. The PCBA test is the final and most important step of the process. It determines whether the previous steps were successful. There are different detection methods.

1) Visual Inspection:

We can opt visual inspection for a few boards. The designer can check the PCB and make sure it is of high quality.

2) Automatic Optical Inspection

This method is ideal for PCBA inspection on a large scale. Automatic optical inspection machines use high-performance cameras that can detect and observe welding problems from different angles.

3) X-Ray:

Check the inner layer of the printed circuit assembly using infrared.

4) In-Circuit Test System（ICT）:

The tester will show the user which component has a fault or where the short is located.

5) QC Manual Inspection:

The IPC-610 standard inspection standard requires that the board be checked to ensure 99.98% quality.

6) QA Inspection of Shipments:

Scanning codes and strict inspections before shipment of products are required to ensure that only qualified products are shipped.

Step 7: Apply 3 Anti-Paint

By applying conformal coating to the PCBA's surface, you can protect the PCBA from moisture and corrosion. This will extend the life of the product. You can now pack and ship your product after completing the two steps above.

Summary

Is an arduous and complex process. The process must be done step-by-step. Each link is important. Each link is crucial.